Skip to main content
Free Shipping on Orders $89.00 or More to the Lower 48 States Same Day Shipping — Order by 3 PM EST M–F … It Ships!

Flaring Eyelets and Rivets for Thermoform Sheet and Leather

Shop flaring eyelets for clamping layered thermoform sheet, along with rivets that fasten and finish leather, canvas and nylon. Black or brass eyelets fit 3/16 or 1/4 inch holes in packs of 25 or 100, and the rivets range from double caps in three finishes to an antique brass shell design and nickel rapid rivets.

Read more

To join a two-layer stack of KYDEX® or HOLSTEX® sheet, a flaring eyelet goes through both layers and an eyelet flaring tool rolls it over. Each finish, black or brass, is USA made and comes in seven sizes sold by the 25 or 100. In the size code, the number after the # sets the hole diameter (3/16 inch for #6, 1/4 inch for #8) and the number after the dash sets the barrel length. A 6 barrel covers two layers of about .060 inch, an 8 about .080 inch, a 9 about .093 inch and a 12 about .125 inch.

Double cap rivets fasten leather or canvas with a cap at each end, so the joint looks finished front and back. Both Medium and Large come in nickel, black and brass, and the Large carries the longer barrel. For a decorative look, choose the USA made antique brass rivet with a detailed shell design on its 0.97 inch head, sold by the piece. Nickel plated 1/4 inch rapid rivets strengthen stitched seams and secure belt loops or closure tabs in leather, nylon and thermoform plastic. Packs contain 10 caps and 10 posts, which set with a ball peen hammer or hand setter.

More fasteners are listed under Hardware, and if you send us your combined sheet thickness, we can help you size an eyelet.